Phone number
Terms
  • Product Image- Style 114/114A Solid Carbide, High Performance, Stub Length Drill

    Submicron carbide grade provides maximum wear resistance when cutting high carbon, high alloy and stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.

    • Stub length and 140° double split point eliminates spot drilling and reaming in most instances.
    • Heavy web, high helix flute clears chips effectively allowing up to five times greater penetration rate vs. standard high speed steel.
    • Right hand spiral ,right hand cut.
    • See style 113 for steel cutting carbide grade.
    • Coating adds lubricity, enhances wear resistance and prevents edge build-up. TiAlN coating is recommended for short chipping, abrasive and high temperature materials. TiN coating is recommended for long chipping, low-carbon, ductile and gummy materials.
    • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image- Style 114/114A Solid Carbide, High Performance, Stub Length Drill

    Submicron carbide grade provides maximum wear resistance when cutting high carbon, high alloy and stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.

    • Stub length and 140° double split point eliminates spot drilling and reaming in most instances.
    • Heavy web, high helix flute clears chips effectively allowing up to five times greater penetration rate vs. standard high speed steel.
    • Right hand spiral ,right hand cut.
    • See style 113 for steel cutting carbide grade.
    • Coating adds lubricity, enhances wear resistance and prevents edge build-up. TiAlN coating is recommended for short chipping, abrasive and high temperature materials. TiN coating is recommended for long chipping, low-carbon, ductile and gummy materials.
    • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image- Style 114/114A Solid Carbide, High Performance, Stub Length Drill

    Steel cutting carbide grade provides maximum tool life when cutting low to medium carbon steels under 30 Rc/286 Hb, softer stainless steel.

    • Stub length and 140° double split point eliminate spot drilling and reaming in most instances.
    • Heavy web and unique flute shape break chips at high feed rates in gummy and stringy materials.
    • Right hand spiral, right hand cut.
    • TiCN coating adds lubricity, heat resistance and prevents edge build-up.
    • See style 114 for non-ferrous materials, hardened steels and stainless.
    • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image Style 118A Solid Carbide, High Performance, Jobber Length Drill

    Submicron carbide grade and Tail coating provides maximum wear resistance when cutting high carbon, high alloy and stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.

    • Jobber length and 140° double split point eliminate spot drilling and reaming in most instances.
    • Heavy web, high helix flute clears chips effectively allowing up to five times greater penetration rate vs. standard high speed steel.
    • Right hand spiral, right hand cut.
    • See style 116 for steel cutting carbide grade.
    • TiAlN coating adds lubricity, enhances wear resistance, prevent sedge build-up, and is recommended for short chipping, abrasive and high temperature materials.
    • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image Style 116 Solid Carbide, High Performance, Jobber Length Drill

    Steel cutting carbide grade provides maximum tool life when cutting low to medium carbon steels under 30 Rc/286 Hb, softer stainless steels.

    • Solid carbide, heavy web and 140° double split point allow self-starting without spot drilling in many extended reach situations.
    • Heavy web and unique flute shape break chips at high feed rates in gummy and stringy materials.
    • Right hand spiral, right hand cut.
    • See style 118A for non-ferrous materials, hardened steels and stainless.
    • TiCN coating adds lubricity, heat resistance and prevents edge build-up.
    • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image- Style 121 Solid Carbide, 3 Flute, Jobber Length Drill

    High abrasion resistant carbide provides maximum wear resistance and increased penetration rates in short chipping materials. Ideal for gray iron, brass, bronze.

    • 3-flute, high helix construction offers exceptional straightness, diameter tolerances, core drilling capability and can eliminate reaming operations.
    • Jobber length and 150° self centering web thinned point can eliminate spot drilling in most applications.
    • Excellent hole positioning and size control make this an excellent starting drill.
    • Right hand spiral, right hand cut.
    • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image-Style 111 Solid Carbide, General Purpose, Stub Length Drill

    Standard helix and self-centering four facet point provides efficient drilling of cast iron, aluminum casting, bronze, hard plastics and other non-ferrous materials.

    • Submicron carbide grade offers additional toughness.
    • Short tool length increases accuracy and drill life.
    • Right hand spiral, right hand cut.
    • Allow 1.5 to 2 x Ø of flute for chip exit.
    • Shank Ø = Cutting Ø

  • Product Image- Style 124 Solid Carbide, General Purpose, Jobber Length Drill

    Standard helix and self-centering four facet point provides efficient drilling of cast iron, cast aluminum, bronze, hard plastics and other abrasive and easily machined materials.

    • Submicron carbide grade offers additional toughness.
    • Special parabolic flute and high helix constructions, threaded shank adapters and aerospace split points available upon request.
    • Right hand spiral, right hand cut.
    • Allow 1.5 to 2 x Ø of flute for chip exit.
    • Shank Ø = Cutting Ø

  • Product Image- Style 144 Solid Carbide, Double End Drill/Countersink

    Submicron solid carbide construction offers extreme rigidity.

    • 118° four facet point.
    • Right hand spiral, right hand cut.

  • Product Image- Style 151 Solid Carbide, Spade Style, Die Drill

    Straight flute, right hand cut, heavy duty web reduces breakage drilling shallow holes in hardened steels.

    • Solid carbide, 118° point.
    • Also see drill Styles 150 &155.
    • Not recommended for more than 2 x Ø deep.

  • Product Image- Style 155 Solid Carbide, Straight Flute, Die Drill

    Straight flute, right hand cut, heavy web construction is ideal for high accuracy hole drilling in hard metal parts over 40 Rc/371 Hb and abrasive materials.

    • 135° modified four facet notched thinned point.
    • Submicron carbide grade.
    • Produces reamer like hole finish, accurate hole size and can be used for coring out pre-existing holes.
    • Clear chips frequently and leave 2 x Ø for chip exit.
    • Also see die drill Styles 150 & 151.
    • Shank Ø = Cutting Ø

  • Product Image- Style 153 Solid Carbide, Short Length, Bore Drill/Burnisher

    Double margin, flat clearance construction produces reamer like finishes and resists walking when cutting aluminum castings, cast iron, cored holes and angular exits.

    • Effective chip control up to 3.5 x Ø deep with flood coolant.
    • High abrasion resistance carbide.
    • Excellent tool life and easy to regrind four facet point.
    • Straight flute, right hand cut.
    • Step drill and coolant feeding designs available upon request.
    • Allow 2.5 x Ø of flute for chip exit up to 1/4” (6.35mm), 2 x Ø up to 7/16” (11.1mm) and 1.5 x Ø over 7/16”.
    • Shank Ø = Cutting Ø

  • Product Image- Style 154 Solid Carbide, Long Length, Bore Drill/Burnisher

    Double margin, flat clearance construction produces reamer like finishes and resists walking when cutting aluminum castings, cast iron, cored holes and angular exits.

    • Effective chip control up to 3.5 x Ø deep with flood coolant.
    • High abrasion resistance carbide
    • Straight flute, right hand cut.
    • Excellent tool life and easy to regrind four facet point.
    • Step drill and coolant feeding designs available upon request.
    • Allow 2.5 x Ø of flute for chip exit up to 1/4” (6.35mm), 2 x Ø up to 7/16” (11.1mm) and 1.5 x Ø over 7/16”.
    • Shank Ø = Cutting Ø